You can hang chandeliers or play classical music, but if your floors look bad, the rest of your efforts are meaningless.
Management needs to commit to contracting (or training) great people that won’t take short cuts. Many contractors and management professionals think that if you slop down some cheap floor finish to make it shiny for awhile, your customers (and employees) will find it acceptable. They don’t.
We recognize the overall financial savings of buffing & burnishing floors to renew its luster, extend the overall life of the floors as well as the time between re-coats. This inexpensive method of removing scuff marks and embedded soil, keeps your floors looking their best on a regular basis while reducing the likelihood of slip & fall accidents.
At Scrub n Shine, a thorough cleaning includes detailing corners, edge work, transition trim and baseboards. With new customers, we usually find buildup that requires the use of a special cleaner to break down the years of neglect so we can scrub the crud away. Once clean, we treat them with a product that keeps them looking their best.
Regular buffing or burnishing of hard flooring is strongly encouraged as part of an overall maintenance program.
This customer is one of our favorites. It’s a small town church with a daycare. Their people are outstanding to work with! These VCT Floors Were Deep Scrubbed then Coated with a Durable Clear Acrylic We Coordinated Invoicing Between the Church, its Daycar…
Vinyl Floor Scrub and ReCoat Service in Chanhassen MN. General Contracted Cleaners have our assurance that we will not compete with them. We appreciate the work that frequently comes from cleaning companies that do not have the experience nor expertise to handle special projects.
We’ve been called annually for the past three years to work on this old VCT floor. Despite no interim maintenance program, this old floor is starting to look good. Restore Your Old VCT Tile Floor and Save Thousands of Dollars! This Old Barber Shop VCT Flo…
Old VCT Floor Restoration Job in St Michael MN. This iconic bar wasn’t happy with the results of their existing floor maintenance program and they called us in to help. Old Dirty VCT Floors Can Usually Be Restored to Look Great Again.
Old VCT Floor Restoration Job in Edina, MN. Unfinished VCT Floors Absorb Rust and Other Stains. Contact us to discuss your commercial floor maintenance needs. We can help!
This job was at an occupational rehab facility in St. Paul. Rust Stains were Completely Embedded (to the Bottom of the Tiles) Before Replacing Your Old VCT Floor, Gives Us a Call
Decades of Neglect Left Soils So Deeply Embedded, You Can Still See Shadows Contact us to discuss your commercial floor maintenance situation. We can help!
Restaurant VCT Floor Scrub and High Gloss Clear Coatings Job in Minneapolis. This Restaurant VCT Floor had Badly Embedded Soils. We Deep Scrubbed the VCT Floor then Applied a Several Coats of a Commercial-Grade High-Quality Clear Acrylic. Before Replacing your Old VCT Floor, Give Us a Call!
This VCT Tile Floor is at Least 25 Years Old Our Floor Finishes Can Handle Heavy-Duty Winter Foot Traffic Contact us to discuss your commercial floor maintenance needs. We can help!
Deep Gloss on ANY Commercial Flooring is All About “The Build”. We rarely strip floor finish. We prefer to deep scrub and build up the floor’s finish with multiple thin coats. It’s critical to keep the floor clean between re-coats to prevent soils from becoming embedded. Interim buffing is ideal to maintain the floor’s finish between re-coats.
New VCT Floor Sealed and Finished at Maple Grove Church. New VCT Floors Need to Be Professionally Sealed and Finished.
Small Area VCT Floor Scrub and Re-Coat Service in Minneapolis. Just need a small floor re-coated? We can do that!
Ancient VCT Floor with Some Serious Issues in Minneapolis Church. Previous Contractor Allowed Floor Stripping Solution to “Lock-Up” Several Times. In addition to finding shoddy workmanship by previous workers, we also found moisture issues. After discussing their options, we agreed to do a strip (of what we could remove in one pass) and apply three coats of a commercial-grade, mid-solids floor finish. The goal was to make the floor presentable until they fully assess their budget and obtain bids to address the moisture issues.
Well Known National Franchise Did a Very Poor Job on This VCT Floor Last Time it was Done. They put low-grade floor finish on top of debris left on the floor. We were able to get the customer’s floor looking great again!
Love working with churches! They appreciate our attention to detail and quality of our products. It’s All About Floor Finish “Build” Deep gloss can only be obtained through properly maintaining floors with quality products over a long period of time. This…
Sealer and Clear Coat Finish Put on New VCT Floor in Remodeled Retail Store. We enjoy working with VCT floor tile installers and commercial remodelers in the Twin Cities!
VCT Floor Strip and Wax in St Paul. Contact us to restore your VCT floors. We can help!
Old VCT Floor was Stripped Sealed and Clear Coat Finish Applied in St Paul. We Were Able to Clean the Vinyl Baseboards and Scraped Off Several Layers of Finish
New VCT Floor Sealing and Clear Coating Services Twin Cities. All commercial hard floor surfaces should be professionally sealed and finished to enhance its beauty and extend the life of the floor product – even NEW FLOORS.
Restoration of Old VCT Floor in Minneapolis Church. This may be the first VCT floor ever installed! It was in a church basement on Lake of the Isles. We stripped at least 10 coats of finish, possibly upwards of 20 coats! Before replacing your old VCT flooring, contact us. We can help breathe some life back into it and save you a lot of money!
Very Small (But Cute) VCT Floor Job in Edina, MN. VCT (Vinyl Composite Tile) manufacturers will say that their new VCT floor tiles are already sealed, it really isn’t. New VCT tile floors should be deep scrubbed and truly sealed with a high-quality, commercial-grade product. In addition to being professionally sealed, it is highly recommended to apply 2-3 coats of Scrub-n-Shine.com clear floor finish.
Polished Concrete Floor Gets Much Needed Scrub and ReCoat in Wayzata. The customer was told that polished concrete will never need a sealer or coatings – ever. Well, after years of wear, it needed a little help.
VCT Floor with Locked-Up Stripper Solution in Glencoe, MN. Most Floors Don’t Need to Be Stripped. Always deep scrub first to remove as much soil as you can before doing the “strip job”. Locked-Up Stripper Solution is Extremely Difficult to Remove.
While we don’t do residential jobs, I thought it was worthwhile to share the results of a Scrub n Shine staff member that tried one of our new one-part water based floor finishes on his own floors. This is a very old hardwood floor that was not sanded or…
Very Old VCT Tile Floor Stripped, Sealed and Clear Coat Finished in Minneapolis. This VCT floor job was challenging. Not to be outdone by the Evansville, MN job a few years ago, but close. Nobody knows how old their floors are, but we were able to get them looking pretty good I think. The pictures were taken a few days after the job was done.
VCT Floor Coatings Services in Minneapolis Medical Manufacturing Facility. This customer’s business is growing and they remodeled (moving walls, etc.) and asked us to deep scrub their old and new VCT tile floors. It’s always a challenge trying to blend old flooring with new, but I think we pulled it off.
VCT (Vinyl) Tile Floors Cleaned, Sealed, Clear-Coat Finished in Clean Room Environment (St. Paul, MN). This business is a Research and Development Facility in St. Paul, MN (Twin Cities). They were amazed at the amount of ground-in soil that was removed and loved the high-gloss clear coating when the job was completed!
VCT Tile Floors Were Deep Scrubbed and Clear Coated The VCT tile floors in the office were deep scrubbed by mechanical means. Once dry, three coats of a commercial grade clear acrylic floor finish was applied. Commercial Ceramic Floor Tile and Grout Deep…
New Construction VCT Vinyl Tile Floor Cleaning, Sealing and Clear Coat Finish. This 13,000 square ft. VCT vinyl tile floor needed to be scrubbed, sealed and clear coated before the owners moved in. Owner of this Beautiful New Building in Plymouth was Happy with the Results.
Old VCT Tile Floor in Burnsville, MN Deep Scrub and Re-Coat with Mid-Solids High Gloss Finish. This business wanted to convert an old storage room into a small meeting room and had concerns whether the floor would need to be replaced or not. We were able to get the floor looking like new again, savings them a lot of money!
We Don’t Usually Work on Residential Floors, But… This was a “special” request :)